Konica Minolta SL1000 Microfiche User Manual page 101

Manual Roll Film Carrier
1
Remove the knob from the Reel Shaft.
Knob
2
Mount the Roll Film onto the Reel Shaft and unwind the Leading Edge of the Film.
NOTE ! Be sure to set the film so that its winding direction is to be clockwise.
The film will not be correctly rewound if the open reel Roll Film is mounted in the
opposite direction.
Install the Roll Film to the reel so that the square hole of the film and the square
face can be adjusted.
Chapter 4 Operation
4-11