Konica Minolta SL1000 Microfiche User Manual page 58

SL1000 User's Guide
9. Image Type
10. Edit
11. Save In
3-32
The mode of the output image (Color and Binary) is set.
When Film "Color Film" is selected:
Only the Color (24bit) can be selected.
When film "Monochrome Film" is selected:
It can be selected according to 4 selections (Gray Scale (8bit),
B/W (Manual), B/W (Auto), B/W (Error Diffusion)).
"Masking" and "Centering" are set.
1. Masking: When a size that is larger than the image that has
been selected, the outside of the image is deleted by
"White".
2. Centering: The center gap of the image is detected, and the
image is arranged at the center of the output area.
The Masking might not function normally according to
NOTE !

shape and the density of the image.
It selects the repository for each batch scanned file.
The scanned file is saved to each batch folder.
When the "Save In" repository is not designated, a folder for each
custom profile registered in the SL-Touch folder is created, and the
folder of each batch is created under that name. ･･･ Reference to figure
below
As for the Default batch folder, preservation place cannot change.
Application
folder
My
SL-Touch
Picture
Custom
profile Batch
registered folder
folder
Default Default
Batch 1
Profile A Default
Batch 1
Profile B Default
Batch 1
Change
Repository
Impossible
Possible
Impossible
Possible
Impossible
Possible