9
When the "InstallShield Wizard Complete" screen appears, click the "Finish" button and
remove the CD-ROM from the Personal Computer.
IMPORTANT !
Execute the installation of the device driver when the installation of
SL-Touch for SL1000 application is completed.
If the installation of the device driver is not completed, the application
cannot be started.
Install the device driver according to the following procedures.
10
Connect the Scanner to the Personal Computer with the USB cable.
11
Turn the Power Switch of the Scanner ON.
12
"Installing device driver software" appears.
13
When "SL1000 Digital Film Scanner Device driver software installed successfully" is
displayed, the driver was installed successfully.
Chapter 3 SL-Touch for SL1000
3-7