Konica Minolta SL1000 Microfiche User Manual page 52

SL1000 User's Guide
2. Adjustment Area
3. Brightness
3-26
The adjustable range of "Brightness" and "Contrast" is selected.
Entire: Display of the histogram in read whole area and "Brightness"
and "Contrast" are adjusted.
Selected: Display of the histogram in read selected area and "Brightness"
and "Contrast" are adjusted.
Procedure of the operation:
1) The Cropping Area disappears when "Selected" is selected,
and the selection range frame is displayed in the dotted line
of "Orange" and "White".
2) The selection range frame is set to the adjusted position.
3) When "Brightness" or "Contrast" is changed, it is affected in
the image of the selection range frame. Please set it to a
proper value.
4) The changed setting is settled when "OK" is pressed, the
selection range frame disappears, and the Cropping Area is
displayed.
5) When other range is adjusted, the "Image adjustment" is
pressed again, and 1) to 4) is executed.
NOTE !
Whole areas except "Brightness" and "Contrast" are
NOTE !

adjusted.
The brightness of the image is adjusted.
Lighter
Darker
A specified frequency of "Selected" is eight

places or less.
The adjusted image returns to the initial when

"Image rotation" and "Skew correction" are
executed, and the scan image of the film is
changed.
The selection range frame is not changed at the

zoom. Please return to normal display pressing
"Fit to Window", and execute it.
The image is lightened.
The image is darkened.