About The Scan Setting Screen - Konica Minolta bizhub PRESS 1052 User Manual

7.8

About the Scan Setting Screen

7.8 About the Scan Setting Screen
Pressing [Scan Settings] on the adress selecting screen displays the Scan Setting screen. On the Scan Set-
ting screen, such settings as original setting and quality adjustment can be configured.
No. Item
1 [Original Settings]
2 [Separate Scan]
3 [Direction]
4 [Quality Adj.]
5 [Zoom]
6 [Application]
7 [File Type]
8 [Simplex/Duplex]
bizhub PRESS 1250/1052
1 2 3
12 11
Description
You can set various settings on the original such as the original orientation,
bind direction, etc.
Original on multiple sheets which cannot be transmitted by ADF can be
read using the original glass.
Specify the direction of the original.
Specify the density of scanning in 9 levels.
You can register the scanning density and recall them by pressing [Pre1]
and [Pre2].
You can specify various settings on zooming for scanning.
To change a zoom level, a setting is required. For more information, con-
tact your service representative.
[+],[-] Specify a zoom level for scanning.
[x1.0] Specify a zoom level for scanning.
[4.00],[2.00] You can specify the registered zoom level.
You can configure various application functions for page editing and im-
age processing.
Specify the file type to scan.
• [Pack. PDF]/[Div. PDF]
• [Pack. TIFF]/[Div. TIFF]
• [Pack. XPS]/[Div. XPS]
• [Encryption]
You can specify a password by pressing [Encryption] when PDF is select-
ed for the file type.
You can scan both sides of the original when [ADF] is selected in [Scan In-
itial Setting] screen.
[Scan Initial Setting] screen can be displayed by pressing [Utility/Counter]-
[Scan Setting]-[Scan Initial Setting].
4 5
10 9 8
6
7
Refer-
ence page
p. 7-36
p. 7-37
p. 7-38
p. 7-39
p. 7-40
p. 7-41
7
7-35