Konica Minolta SL1000 Microfiche User Manual page 107

When the 16 mm/35 mm Roll Film (Open-Reel) is used.
16 mm/35 mm Roll Film (Open-Reel) can be used with the A-Type Cartridge Adaptor installed.
1
Mount the 16 mm or 35 mm Film (Open-Reel) onto the Reel Shaft in the figure below and
unwind the Leading Edge of the Film.
2
Insert the film between the upper and lower fiche glass.
NOTE ! Set the film as shown in the figure below.
・ Do not set it in a counterclockwise rolling so that the film surface might get the wound.
3
Insert the Leading Edge of the Film into the slit in the take-up reel and rotate the take-up
reel two to three turns so that the Film Leader is wound around the take-up reel.
4
Operate the Fiche Carrier, and rewind the film to an image lead position.
CAUTION
Chapter 4 Operation
4-17