Status:operation:enable; Status:operation:ntr Status:operation:ptr - Agilent Technologies 66312A Programming Manual

4 - Language Dictionary

STATus:OPERation:ENABle

This command and its query set and read the value of the Operational Enable register. This register is a
mask for enabling specific bits from the Operation Event register to set the operation summary bit (OPER)
of the Status Byte register. This bit (bit 7) is the logical OR of all the Operatonal Event register bits that are
enabled by the Status Operation Enable register.
Command Syntax
Parameters
Preset Value
Examples
Query Syntax
Returned Parameters
Related Commands
STATus:OPERation:NTR
STATus:OPERation:PTR
These commands set or read the value of the Operation NTR (Negative-Transition) and PTR (Positive-
Transistion) registers. These registers serve as polarity filters between the Operation Enable and
Operation Event registers to cause the following actions:
u When a bit in the Operation NTR register is set to 1, then a 1-to-0 transition of the corresponding
bit in the Operation Condition register causes that bit in the Operation Event register to be set.
u When a bit of the Operation PTR register is set to 1, then a 0-to-1 transition of the corresponding
bit in the Operation Condition register causes that bit in the Operation Event register to be set.
u If the same bits in both NTR and PTR registers are set to 1, then any transition of that bit at the
Operation Condition register sets the corresponding bit in the Operation Event register.
u If the same bits in both NTR and PTR registers are set to 0, then no transition of that bit at the
Operation Condition register can set the corresponding bit in the Operation Event register.
Command Syntax
Parameters
Preset Value
Examples
Query Syntax
Returned Parameters
Related Commands
62
STATus:OPERation:ENABle<NRf>
0 to 32727
0
STAT:OPER:ENAB 1312STAT:OPER:ENAB 1
STATUS:OPERATION:ENABLE?
STATus:OPERation:ENABle?
<NR1> (register value)
STAT:OPER:EVEN
STATus:OPERtion:NTRansition<NRf>
STATus:OPERtion:PTRansition<NRf>
0 to 32727
NTR register = 0; PTR register = 32727
STAT:OPER:NTR 32
STAT:OPER:NTR?
<NR1> (register value)
STAT:OPER:ENAB
STAT:OPER:PTR 1312
STAT:OPER:PTR?