Cisco 2950 - Catalyst Switch Configuration Manual page 122

Configuring CNS Embedded Agents
Command
Step 6 ip route network-number
Step 7
cns id interface num {dns-reverse | ipaddress |
mac-address} [event]
or
cns id {hardware-serial | hostname | string string} [event]
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
6-10
Chapter 6
Purpose
Establish a static route to the Configuration Registrar
whose IP address is network-number.
Set the unique eventID or configID used by the
Configuration Registrar.
• For interface num, enter the type of interface–for
example, Ethernet, Group-Async, Loopback, or
Virtual-Template. This setting specifies from
which interface the IP or MAC address should be
retrieved to define the unique ID.
For {dns-reverse | ipaddress | mac-address}
•
enter dns-reverse to retrieve the host name and
assign it as the unique ID, enter ipaddress to use
the IP address, or enter mac-address to use the
MAC address as the unique ID.
• (Optional) Enter event to set the ID to be the
event-id value used to identify the switch.
• For {hardware-serial | hostname|
string string}, enter hardware-serial to set the
switch serial number as the unique ID, enter
hostname (the default) to select the switch host
name as the unique ID, or enter an arbitrary text
string for string string as the unique ID.
Configuring IE2100 CNS Agents
78-11380-10