Creating Or Modifying An Ethernet Vlan - Cisco 2950 - Catalyst Switch Configuration Manual

Software configuration guide
Hide thumbs Also See for 2950 - Catalyst Switch:
Table of Contents

Advertisement

Configuring Normal-Range VLANs
Table 17-2 Ethernet VLAN Defaults and Ranges
Parameter
VLAN ID
VLAN name
802.10 SAID
MTU size
Translational bridge 1
Translational bridge 2
VLAN state
Remote SPAN

Creating or Modifying an Ethernet VLAN

Each Ethernet VLAN in the VLAN database has a unique, 4-digit ID that can be a number from 1
to 1001. VLAN IDs 1002 to 1005 are reserved for Token Ring and FDDI VLANs. To create a
normal-range VLAN to be added to the VLAN database, assign a number and name to the VLAN.
Note
When the switch is in VTP transparent mode and the EI is installed, you can assign VLAN IDs greater
than 1006, but they are not added to the VLAN database. See the
VLANs" section on page
For the list of default parameters that are assigned when you add a VLAN, see the
Normal-Range VLANs" section on page
Beginning in privileged EXEC mode, follow these steps to use config-vlan mode to create or modify an
Ethernet VLAN:
Command
Step 1
configure terminal
Step 2
vlan vlan-id
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
17-8
Default
1
VLANxxxx, where xxxx
represents four numeric digits
(including leading zeros) equal
to the VLAN ID number
100001 (100000 plus the
VLAN ID)
1500
0
0
active
disabled
17-12.
17-4.
Purpose
Enter global configuration mode.
Enter a VLAN ID, and enter config-vlan mode. Enter a new VLAN ID
to create a VLAN, or enter an existing VLAN ID to modify a VLAN.
The available VLAN ID range for this command is 1 to 1005
Note
when the SI is installed and 1 to 4094 when the EI is
installed.For information about adding VLAN IDs greater than
1005 (extended-range VLANs), see the
Extended-Range VLANs" section on page
Chapter 17
Range
1 to 4094when the EI is installed and 1 to
1005 when the SI is installed.
Note
Extended-range VLANs (VLAN
IDs 1006 to 4094) are not saved in
the VLAN database.
No range
1–4294967294
1500–18190
0–1005
0–1005
active, suspend
enabled, disabled
"Configuring Extended-Range
"Configuring
"Configuring
17-12.
Configuring VLANs
78-11380-10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 2955

Table of Contents