Cisco 2950 - Catalyst Switch Configuration Manual page 146

Creating a Switch Cluster
For additional authentication considerations in switch clusters, see the
section on page
Figure 7-10 Add to Cluster Window
2900-LRE-24-1
Figure 7-11 Using the Topology View to Add Member Switches
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
7-20
7-16.
Thin line means a
connection to a
candidate switch.
"TACACS+ and RADIUS"
Select a switch, and click
Add. Press Ctrl and left-
click to select more than
one switch.
Enter the password of
the candidate switch. If
no password exists for
the switch, leave this
field blank.
Right-click a candidate
switch to display the
pop-up menu, and select
Add to Cluster to add
the switch to the cluster.
Chapter 7 Clustering Switches
78-11380-10