Front Panel View - Cisco 2950 - Catalyst Switch Configuration Manual

Chapter 4 Getting Started with CMS

Front Panel View

When CMS is launched from a command switch, you can display the Front Panel view by clicking the
Front Panel button on the tool bar, as shown in
Figure 4-6
1
When CMS is launched from a noncommand switch, the CMS Front Panel view displays by default, and
the front-panel image displays only the front panel of that switch.
The Front Panel view displays the front-panel image of the command switch and any other switches that
were selected the last time the view was displayed.
You can choose and configure the switches that appear in Front Panel view. You can drag the switches
that appear and re-arrange them. You can right-click on a switch port to configure that port.
Figure 4-7
1
1
2
78-11380-10
Toolbar
Front Panel view button
Front Panel View and Port Popup Menu
2
3
Cluster tree 3
4
Command switch
Figure 4-6.
1 2
2
Topology view button
4
Checkboxes to show switches
Port configuration popup menu
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
Displaying CMS
4-13