Remote Access Code - AT&T EL52309 - DECT 6.0 User Manual

Handset settings
Answering system settings

Remote access code

To access your answering system remotely from any touch tone phone, you
need to enter a two-digit number (10-99). Unless you change it, the remote
access code is 19.
To change the remote access code:
1. When the handset is in idle mode, press MENU/
to enter the main menu.
2. Press MENU
/SELECT
3. Press CID or DIR
press /SELECT.
MENU
4. Press CID or DIR
press /SELECT.
MENU
5. Press CID or DIR
6. Press /SELECT to confirm your setting. A
MENU
confirmation tone sounds.
again.
to scroll to >ANS SYS SETUP, then
to scroll to >REMOTE CODE, then
to change the remote access code.
17
SELECT
?BOT/!TZTUFN
EJSFDUPSZ
?BOT!TZT!TFUVQ
QMBZ!NTHT
?SFNPUF!DPEF
NTH!BMFSU!UPOF
SFNPUF!DPEF
2: