Set Date/Time - AT&T EL52309 - DECT 6.0 User Manual

Handset settings
Telephone settings

Set date/time

The answering system announces the date and time of the message prior to
playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. However, the year must be set so that
the day of the week can be calculated from the caller ID information.
Follow the steps below to set the month, day, year and time.
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press CID or DIR
press /SELECT.
MENU
3. Press CID or DIR
correct number using the dial pad, then press
/SELECT to confirm.
MENU
4. Press CID or DIR
correct number using the dial pad, then press
/SELECT to confirm.
MENU
5. Press CID or DIR
correct number using the dial pad, then press
/SELECT to confirm.
MENU
6. Press CID or DIR
correct number using the dial pad, then press
/SELECT to confirm.
MENU
7. Press CID or DIR
correct number using the dial pad, then press
8. Press CID or DIR
confirm. There is a confirmation tone.
NOTE: If the clock is not set when a message is recorded, the system announces,
"Time and day not set" before the message is played.
to scroll to >SET DATE/TIME, then
to select the month, or enter the
to select the day, or enter the
to select the year, or enter the
to select the hour, or enter the
to select the minute, or enter the
to select the AM or PM, then press
11
to
SELECT
?BOT/!TZTUFN
EJSFDUPSZ
?TFU!EBUF0UJNF
DMS!WPJDFNBJM
TFU!EBUF
..0..0..
TFU!UJNF
..;..!..
/SELECT to confirm.
MENU
/SELECT to
MENU