Message Playback - AT&T EL52309 - DECT 6.0 User Manual

Answering system

Message playback

If you have new messages, you hear only the new messages (oldest first). If
there are no new messages, the system plays back all the messages (oldest
first).
When playback begins, the total number of messages is announced. Before
each message, you hear the day and time it was received. After the last
message, you hear "End of messages." If the system has less than five
minutes of recording time left, you hear the remaining time.
To listen messages at the telephone base:
Press PLAY/
system announces the number of messages, then begins playback. Press
/STOP again to end the message playback.
PLAY
To listen to messages at the handset:
1. When the handset is in idle mode, press MENU/
to enter the main menu.
2. Press /SELECT again to select >ANS. SYSTEM.
MENU
3. Press /SELECT to select >PLAY MSGS.
MENU
The system announces the number of messages, then
begins playback. The message sequence is shown on the
handset's screen. If there is no message in the answering
system, the screen shows NO MESSAGES.
on the telephone base to listen to the messages. The
STOP
SELECT
39
?BOT/!TZTUFN
EJSFDUPSZ
?QMBZ!NTHT
EFM!BMM!PME
6.TUPQ!4.EFMFUF
5.SFQFBU!7.TLJQ
MSG#
!203