Multiple Handset Use Handset Locator; Join A Call In Progress - AT&T EL52309 - DECT 6.0 User Manual

Multiple handset use
Multiple handset use
Handset locator
The handset locator feature is useful if you
misplace any handsets.
To start the paging tone:
Press HANDSET LOCATOR at the telephone base
to start the paging tone on all handsets for 60
seconds.
NOTE: If you press
a handset, the ringer of the handset is silenced but
the paging tone continues.
To stop the paging tone:
• Press PHONE/FLASH,
key (0-9, *, or #) on the handset(s),
-OR-
• Press HANDSET LOCATOR on the telephone
base.
NOTE: The handset ringer volume also determines the
level of the paging tone. If the handset ringer volume
level is set to off, that handset is silent for all calls and
paging (page 9).

Join a call in progress

You can conference with another system handset while on a call. If a handset
is already on a call and you would like to join the call, press
or SPEAKER on another system handset.
Press OFF/
CLEAR
exit the call. The call is terminated once all handsets hang up.
NOTE: You can only use two system handsets at the same time on an outside call.
OFF/ or MUTE/
CLEAR
SPEAKER, or any dial pad
or place the handset in the telephone base or charger to
on
DELETE
23
++QBHJOH++
PHONE/
FLASH