Remote System Installation; Replicating Your Setup - Compaq AP200 - Professional - 128 MB RAM Reference Manual

3-22 Intelligent Manageability
For more information on using Remote Wakeup and Remote Shutdown, refer
to the online Remote Management Administrators Guide. The Remote
Management Administrators Guide is included with the Remote Management
Administration Tools, and is available in the Support Software CD kit or at the
Compaq website (http://www.compaq.com).

Remote System Installation

Remote System Installation allows you to start and set up your system using
the software and configuration information located on a network server. The
Remote System Installation feature is usually used as a system setup and
configuration tool, and can be used for the following tasks:
Formatting a hard drive
Installing an operating system
Installing application software or drivers
To initiate Remote System Installation, press F12 when the F12=Network
Service Boot message appears in the lower-right corner of the Compaq logo
screen. Follow the instructions on the screen to continue the process.

Replicating Your Setup

This procedure gives an administrator the ability to easily copy one setup
configuration to other workstations of the same model. This allows for faster,
more consistent configuration of multiple workstations. To replicate your setup:
1. Access the Computer Setup Utilities menu.
2. Click File, then Save to Floppy. Follow the instructions on the screen.
3. To replicate the configuration, click File, then Restore from Floppy,
and follow the instructions on the screen.