Laser Precautions; Getting Help; Compaq Website - Compaq AP200 - Professional - 128 MB RAM Reference Manual

Laser Precautions

Getting Help

If you have a problem and have exhausted the information in this guide, you
can get further information and other help in the following locations.

Compaq Website

The Compaq website has information on this product as well as the latest
drivers and Flash ROM images. You can access the Compaq website by
logging on to the Internet at http://www.compaq.com.
Any surface or area of the equipment marked with these
symbols indicates the presence of a hot surface or hot
component. If this surface is contacted, the potential for
injury exists.
WARNING: To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
Power Supplies or Systems marked with these
symbols indicate the equipment is supplied by
multiple sources of power.
WARNING: To reduce the risk of injury from
electrical shock, remove all power cords to
completely disconnect power from the system.
WARNING: To reduce the risk of injury from laser radiation or
damage to the equipment, observe the following precautions:
Allow only Compaq Authorized Service
Technicians to repair the equipment.
Do not open any panels, operate controls, make
adjustments, or perform procedures to a laser
device other than those specified herein.
Do not stare into laser bean when panels are
open.
Compaq Professional Workstation AP200 Reference Guide
xi