Compaq AP200 - Professional - 128 MB RAM Reference Manual page 144

E-6 Error Codes
Power-On Self-Test Messages
601-Diskette Controller
Error
602-Diskette Boot
Record Error
605-Diskette Drive
Type Error
610-External Storage
Drive Failure
611-Primary Floppy
Port Address
Assignment Conflict
612-Secondary Floppy
Port Address
Assignment Conflict
912-The Computer
Cover Has Been
Removed Since Last
System Start Up
* L = Long, S = Short
Message Beeps*
None
None
2S
None
2S
2S
None
Continued
Probable Cause
Diskette controller circuitry or
floppy drive circuitry incorrect.
Diskette in drive A not bootable. Replace the diskette.
Mismatch in drive type.
External tape drive not
connected.
Configuration error.
Configuration error.
Recommended Action
1. Run Setup.
2. Check and/or
replace cables.
3. Replace diskette
drive.
4. Replace the system
board.
Run Computer Setup or
Windows NT utilities.
Reinstall tape drive or
press F1 and allow
system to reconfigure
without the drive.
Run Computer Setup or
Windows NT utilities.
Run Computer Setup or
Windows NT utilities.
Continued