Fcfemoduletable; Fcfemoduleentry; Fcfemoduleindex; Fcfemoduledescr - HP StorageWorks 2/64 - Core Switch Reference Manual

fc FE module table
This table contains information about the fc Fe modules, one entry for each module.

fcFeModuleTable

OID
Description

fcFeModuleEntry

OID
Status
Description
Index

fcFeModuleIndex

OID
Description

fcFeModuleDescr

OID
Description
Note

fcFeModuleObjectID

OID
Description
Note

fcFeModuleOperStatus

OID
Description
1.3.6.1.3.42.2.1.1.4
A table that contains information about the modules, one entry for each module.
1.3.6.1.3.42.2.1.1.4.1
Mandatory
An entry containing the configuration parameters of a module.
fcFeModuleIndex
1.3.6.1.3.42.2.1.1.4.1.1
Identifies the module within the FE for which this entry contains information. This value is
never greater than fcFeModuleCapacity.
1.3.6.1.3.42.2.1.1.4.1.2
A textual description of the module. This value should include the full name and version
identification of the module. It should contain printable ASCII characters.
See "sysDescr" on page 41.
1.3.6.1.3.42.2.1.1.4.1.3
The vendor's authoritative identification of the module. This value might be allocated
within the SMI enterprises subtree (1.3.6.1.4.1). It provides a straight-forward and
unambiguous means for determining what kind of module is being managed.
For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor Neufe Inc.
was assigned the subtree 1.3.6.1.4.1.99649, and had assigned the identifier
1.3.6.1.4.1.99649.3.9 to its FeFiFo-16 PlugInCard.
See "sysObjectID" on page 41.
1.3.6.1.3.42.2.1.1.4.1.4
Indicates the operational status of the module:
• online (1): The module is functioning properly.
• offline (2): The module is not available.
• testing (3): The module is under testing.
• faulty (4): The module is defective in some way.
Fabric OS 5.x MIB reference guide 97