Connunitportspeed; Connunitportcontrol - HP StorageWorks 2/64 - Core Switch Reference Manual

connUnitPortSpeed

OID
Description
Note

connUnitPortControl

OID
Description
232 FibreAlliance MIB objects
1.3.6.1.3.94.1.10.1.15
The speed of the port, in kilobytes per second (KBps).
For example, the valid values for the Core Switch 2/64, SAN Director 2/128, and
4/256 SAN Director: 125,000 KBps, 250,000 KBps, or 500,000 KBps, depending on
the configuration.
1.3.6.1.3.94.1.10.1.16
Controls the addressed connUnit's port.
Valid commands are:
• resetConnUnitPort
If the addressed connUnit allows this operation to be performed to this port, the
addressed port performs a vendor-specific reset operation. Examples of these
operations are:
• The Link Reset protocol.
• The Loop Initialization protocol.
• Resynchronization occurring between the transceiver in the addressed port to the
transceiver to which the port is connected.
• bypassConnUnitPort
If the addressed connUnit allows this operation to be performed to this port, the
addressed port performs a vendor-specific bypass operation. Examples of these
operations are:
• Transitioning from online to offline.
• A request (NON-PARTICIPATING) command to the loop port state machine.
• Removal of the port from an arbitrated loop by a hub.
• unbypassConnUnitPort
If the addressed connUnit allows this operation to be performed to this port, the
addressed port performs a vendor-specific unbypass operation. Examples of these
operations are:
• The Link Failure protocol.
• A request (PARTICIPATING) command to the loop port state machine.
• The addition of the port to an arbitrated loop by a hub.
• offlineConnUnitPort
If the addressed connUnit allows this operation to be performed to this port, the
addressed port performs a vendor-specific offline operation. Examples of these
operations are:
• Disabling a port's transceiver.
• The Link Failure protocol.
• Request (NON-PARTICIPATING) command to the loop port state machine removal
of the port from an arbitrated loop by a hub.
• onlineConnUnitPort
If the addressed connUnit allows this operation to be performed to this port, the
addressed port performs a vendor-specific online operation. Examples of these
operations are:
• Enabling a port's transceiver.
• The Link Failure protocol, request (PARTICIPATING) command to the loop port state
machine.