ifSpeed
OID
Description
Note
ifPhysAddress
OID
Description
Note
ifAdminStatus
OID
Description
Note
ifOperStatus
OID
Description
Note
ifLastChange
OID
Description
ifInOctets
OID
Description
44
MIB-II (RFC1213-MIB)
1.3.6.1.2.1.2.2.1.5
An estimate (in bits per second) of the interface's current bandwidth.
For interfaces that do not vary in bandwidth or interfaces for which no accurate estimation
can be made, this object should contain the nominal bandwidth. For Fabric OS 4.x, 2
Gbit/sec returns.
7
fei0 returns 10
.
lo0 returns 0.
9
fc0 returns 10
.
1.3.6.1.2.1.2.2.1.6
The interface's address at the protocol layer immediately below the network layer in the
protocol stack.
For interfaces that do not have such an address (for example, a serial line), this object
should contain an octet string of zero length.
fei0 returns MAC address of the Ethernet.
lo0 returns null.
fc0 returns MAC address of the Fibre Channel.
1.3.6.1.2.1.2.2.1.7
The desired state of the interface.
The 3 state (testing) indicates that no operational packets can be passed. This object is
read-only in Fabric OS 4.x.
1.3.6.1.2.1.2.2.1.8
The current operational state of the interface.
The 3 state (testing) indicates that no operational packets can be passed.
1.3.6.1.2.1.2.2.1.9
The value of sysUpTime at the time the interface entered its current operational state. If the
current state was entered prior to the last reinitialization of the local network management
subsystem, then this object contains a zero value.
1.3.6.1.2.1.2.2.1.10
The total number of octets received on the interface, including framing characters.