Ifoutdiscards; Ifouterrors; Ifoutqlen; Ifspecific - HP StorageWorks 2/64 - Core Switch Reference Manual

Hp storageworks fabric os 5.x mib reference guide (aa-rvhxb-te, september 2005)
Hide thumbs Also See for StorageWorks 2/64 - Core Switch:
Table of Contents

Advertisement

ifOutDiscards

OID
Description

ifOutErrors

OID
Description

ifOutQLen

OID
Description

ifSpecific

OID
Description
Note

Address translation group

Implementation of the Address Translation group is mandatory for all systems. Note, however, that this
group is deprecated by MIB-II. From MIB-II onward, each network protocol group contains its own address
translation tables.

Address translation table

The Address Translation group contains one table, which is the union across all interfaces of the translation
tables for converting a network address (for example, an IP address) into a subnetwork-specific address.
For lack of a better term, this document refers to such a subnetwork-specific address as a physical address.
For example, for broadcast media, where ARP is in use, the translation table is equivalent to the ARP
cache; on an X.25 network, where nonalgorithmic translation to X.121 addresses is required, the
translation table contains the network address to X.121 address equivalences.

atTable

OID
Description
46
MIB-II (RFC1213-MIB)
1.3.6.1.2.1.2.2.1.19
The number of outbound packets that were chosen to be discarded (even though no errors
had been detected) to prevent their being transmitted. One possible reason for discarding
such a packet could be to free buffer space.
1.3.6.1.2.1.2.2.1.20
The number of outbound packets that could not be transmitted because of errors.
1.3.6.1.2.1.2.2.1.21
The length of the output packet queue (in packets).
1.3.6.1.2.1.2.2.1.22
A reference to MIB definitions specific to the particular media being used to realize the
interface.
For example, if the interface is realized by an Ethernet, then the value of this object refers
to a document defining objects specific to Ethernet. If this information is not present, its
value should be set to the OID 0 0, which is a syntactically valid OID, and any
conferment implementation of ASN.1 and BER must be able to generate and recognize
this value.
fei0 returns null OID.
lo0 returns null OID.
fc0 returns null OID.
1.3.6.1.2.1.3.1
The Address Translation tables contain the network address to physical address
equivalences. Some interfaces do not use translation tables for determining address
equivalences (for example, DDN-X.25 has an algorithmic method); if all interfaces are of
this type, then the Address Translation table is empty.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks fabric os 5.x mib

Table of Contents