Connunitlinkentry; Connunitlinkunitid; Connunitlinkindex; Connunitlinknodeidx - HP StorageWorks 2/64 - Core Switch Reference Manual

connUnitLinkEntry

OID
Description
Index

connUnitLinkUnitId

OID
Description
Note

connUnitLinkIndex

OID
Description
Note

connUnitLinkNodeIdX

OID
Description
Note

connUnitLinkPortNumberX

OID
Description
Note

connUnitLinkPortWwnX

OID
Description
Note
1.3.6.1.3.94.1.12.1
An entry describing a particular link to another.
connUnitLinkUnitId
connUnitLinkIndex
1.3.6.1.3.94.1.12.1.1
The connUnitId of the connectivity unit that contains this link table.
Set to WWN of the local switch.
1.3.6.1.3.94.1.12.1.2
This value is used to create a unique value for each entry in the link table with the same
connUnitLinkUnitId. The value can be reused only if it is not currently in use and the value
is the next candidate to be used. This value is allowed to wrap at the highest value
represented by the number of bits. This value is reset to 0 when the system is reset and the
first value to be used is 1.
Indexes 1 through maximum number of ports is reserved for ISL.
Indexes maximum number of ports + 1 and above are reserved for end devices and are
calculated based on portID of the end devices.
1.3.6.1.3.94.1.12.1.3
The node WWN of the unit at one end of the link. If the node WWN is unknown and the
node is a connUnit in the responding agent, then the value of this object must be equal to
its connUnitID.
WWN of the local switch.
1.3.6.1.3.94.1.12.1.4
The port number on the unit specified by connUnitLinkNodeIdX, if known; otherwise, –1.
If the value is nonnegative, then it is equal to connUnitPortPhysicalNumber.
ISL: Physical port number of the E_Port.
Device: Physical port # to which the device is connected.
1.3.6.1.3.94.1.12.1.5
The port WWN of the unit specified by connUnitLinkNodeIdX, if known; otherwise, 16
octets of binary 0.
The WWN of the port to which the device is connected.
Fabric OS 5.x MIB reference guide 239