connUnitDomainId
OID
Description
Note
connUnitProxyMaster
OID
Description
Note
connUnitPrincipal
OID
Description
Note
connUnitNumSensors
OID
Description
Note
connUnitStatusChangeTime
OID
Description
Note
1.3.6.1.3.94.1.6.1.11
24-bit Fibre Channel address ID of this connectivity unit, right-justified with leading 0s if
required. If this value is not applicable, return all bits to 1.
Set to the switch domain ID (as per FC-SW).
1.3.6.1.3.94.1.6.1.12
A value of yes means this is the proxy master unit for a set of managed units. Possible
values are:
• unknown (1)
• no (2)
• yes (3)
For Example, this could be the only unit with a management card in it for a set of units. A
standalone unit should return yes for this object.
Set to 3 (yes).
1.3.6.1.3.94.1.6.1.13
Indicates whether this connectivity unit is the principal unit within the group of FEs. If this
value is not applicable, it returns unknown. Possible values are:
• unknown (1)
• no (2)
• yes (3)
If the switch is principal, this is set to 3 (yes); otherwise, it is set to 2 (no).
1.3.6.1.3.94.1.6.1.14
Number of sensors (between 0 and maximum number of sensors) in the
connUnitSensorTable.
See
Table 13
on page 152 for specific sensor counts on the various switches.
1.3.6.1.3.94.1.6.1.15
The sysuptime time stamp (in centiseconds) at which the last status change occurred for
any members of the set; this is the latest time stamp that connUnitStatus or
connUnitPortStatus changed.
Not supported.
Fabric OS 5.x MIB reference guide 221