Fibre-Channel-Fe-Mib Definitions - HP StorageWorks 2/64 - Core Switch Reference Manual

Table 6

FIBRE-CHANNEL-FE-MIB definitions

Type definition
Display string
Milliseconds
Microseconds
FcNameId
FabricName
FcPortName
Value
Octet string of size 0 to 255
Integer from 0 to 2147383647
Integer from 0 to 2147383647
Octet string of size 8
Octet string of size 8
Octet string of size 8
Description
Textual information taken from the NVT ASCII
character set as defined on pages 4, 10 and 11
of RFC 854. To summarize RFC 854, the NVT
ASCII repertoire specifies:
• The use of character codes 0-127
(decimal).
• The graphic characters (32-126) are
interpreted as U.S. ASCII.
• NUL, LF, CR, BEL, BS, HT, VT, and FF
have the special meanings specified in
RFC 854.
• The other 25 codes have no standard
interpretation.
• The sequence CR LF means newline.
• The sequence CR NUL means carriage
return.
• An LF not preceded by a CR means
moving to the same column on the next
line.
• The sequence CR x, for any x other than
LF or NUL, is illegal. Note that this also
means that a string can end with either
CR LF or CR NUL, but not with CR.
Any object defined using this syntax may
not exceed 255 characters.
Time unit value in milliseconds
Time unit value in microseconds
World Wide Name (WWN) or Fibre Channel
name associated with an FC entity. It is a
Network_Destination_ID or Network_Source_ID
composed of a value up to 60 bits wide,
occupying the remaining 8 bytes while the first
nibble identifies the format of the
Name_Identifier.
Name_Identifier hex values:
0 (ignored)
1 (IEEE 48-bit address)
2 (IEEE extended)
3 (locally assigned)
4 (32-bit IP address)
The name identifier of a fabric. Each fabric
provides a unique fabric name.
Valid formats include:
IEEE 48
Local
The name identifier associated with a port.
Valid formats include:
IEEE 48
IEEE extended
Local
Fabric OS 5.x MIB reference guide 71