SNMP group
Implementation of the SNMP group is mandatory for all systems that support an SNMP protocol entity.
Some of the objects defined next are zero-valued in those SNMP implementations that are optimized to
support only those functions specific to either a management agent or a management station. All of the
objects that follow refer to an SNMP entity. There might be several SNMP entities residing on a managed
node (for example, if the node is acting as a management station).
snmpInPkts
OID
Description
snmpOutPkts
OID
Description
snmpInBadVersions
OID
Description
snmpInBadCommunityNames
OID
Description
snmpInBadCommunityUses
OID
Description
snmpInASNParseErrs
OID
Description
NOTE:
OID 1.3.6.1.2.1.11.7 is not used.
snmpInTooBigs
OID
Description
62
MIB-II (RFC1213-MIB)
1.3.6.1.2.1.11.1
The total number of messages delivered to the SNMP entity from the transport service.
1.3.6.1.2.1.11.2
The total number of SNMP messages that were passed from the SNMP protocol entity to
the transport service.
1.3.6.1.2.1.11.3
The total number of SNMP messages that were delivered to the SNMP protocol entity and
were for an unsupported SNMP version.
1.3.6.1.2.1.11.4
The total number of SNMP messages delivered to the SNMP protocol entity that used a
SNMP community name not known to said entity.
1.3.6.1.2.1.11.5
The total number of SNMP messages delivered to the SNMP protocol entity that
represented an SNMP operation that was not allowed by the SNMP community named in
the message.
1.3.6.1.2.1.11.6
The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when
decoding received SNMP messages.
1.3.6.1.2.1.11.8
The total number of SNMP power distribution units (PDUs) that were delivered to the
SNMP protocol entity and for which the value of the error-status field is tooBig.