swNbBaudRate
OID
Description
Note
swNbIslState
OID
Description
swNbIslCost
OID
Description
swNbRemPortName
OID
Description
swFabricMemTable
Supported in Fabric OS 2.6.1 and not 3.2.0.
OID
Description
swFabricMemEntry
OID
Description
Index
swFabricMemWwn
OID
Description
156 SW MIB objects
1.3.6.1.4.1.1588.2.1.1.1.2.9.1.5
The baud rate of the ISL. Possible values are:
• other (1): None of the following
• oneEighth (2):155 Mbaud
• quarter (4): 266 Mbaud
• half (8): 532 Mbaud
• full (16): 1 Gbaud
• double (32): 2 Gbaud
• quadruple (64): 4 Gbaud
The valid values for the Core Switch 2/64, SAN Director 2/128, and 4/256 SAN
Director switch are 16 (full) and 32 (double).
The valid value for the SAN Switch 4/32 is 64 (quadruple).
1.3.6.1.4.1.1588.2.1.1.1.2.9.1.6
The current state of the ISL.
1.3.6.1.4.1.1588.2.1.1.1.2.9.1.7
The current link cost of the ISL. In other words, the cost of a link to control the routing
algorithm.
1.3.6.1.4.1.1588.2.1.1.1.2.9.1.8
The WWN of the remote port.
1.3.6.1.4.1.1588.2.1.1.1.2.10
This table contains information on the member switches of a fabric. This might not be
available on all versions of Fabric OS.
1.3.6.1.4.1.1588.2.1.1.1.2.10.1
An entry containing each switch in the fabric.
swFabricMemWwn
1.3.6.1.4.1.1588.2.1.1.1.2.10.1.1
This object identifies the WWN of the member switch.