Table 26
TrapRegRowState for read/write
State
rowDestroy (1)
rowInactive (2)
rowActive (3)
Revision number scalar
revisionNumber
OID
Description
Note
Unsupported tables
The Connectivity Unit Port Statistics Fabric Table is supported only in Fabric OS 2.6.1.
HP does not support the following tables:
•
Connectivity Unit Port Statistics Hub Table
•
Connectivity Unit Port Statistics SCSI Table
•
Connectivity Unit Port Statistics LAN/WAN Table
254 FibreAlliance MIB objects
Read description
Read: Can never happen.
Read: Indicates that this row does
exist but that traps are not
enabled to be sent to the target.
Read: Indicates that this row exists
and that traps are enabled to be
sent to the target.
1.3.6.1.3.94.3
The revision number for this MIB. The format of the revision value is as follows:
• 0 = High order major revision number
• 1 = Low order major revision number
• 2 = High order minor revision number
• 3 = Low order minor revision number
The value is stored as an ASCII value. The following is the current value of this object:
• 0 = 0
• 1 = 3
• 2 = 0
• 3 = 0
This example defines a revision of 03.00.
Set to 0300.
Write description
Write: Remove this row from the table.
Write: If the row does not exist and the agent
allows writes to the trap table, then a new row is
created. The values of the optional columns are
set to default values. Traps are not enabled to
be sent to the target. If the row already existed,
then traps are disabled from being sent to the
target.
Write: If the row does not exist and the agent
allows writes to the trap table, then a new row is
created. The values of the optional columns are
set to default values. Traps are enabled to be
sent to the target. If the row already exists, then
traps are enabled to be sent to the target.