Fcfxportnxportbbcredit; Fcfxportnxportrxdatafieldsize; Fcfxportcossuppagreed; Fcfxportintermixsuppagreed - HP StorageWorks 2/64 - Core Switch Reference Manual

fcFxPortNxPortBbCredit

OID
Description

fcFxPortNxPortRxDataFieldSize

OID
Description

fcFxPortCosSuppAgreed

OID
Description

fcFxPortIntermixSuppAgreed

OID
Description

fcFxPortStackedConnModeAgreed

OID
Description

fcFxPortClass2SeqDelivAgreed

OID
Description

fcFxPortClass3SeqDelivAgreed

OID
Description
1.3.6.1.3.42.2.1.2.4.1.5
The total number of buffers available for holding Class 1 connect-request Class 2 or Class
3 frames to be transmitted to the attached Nx_Port. It is for buffer-to-buffer flow control in
the direction from Fx_Port to Nx_Port. The buffer-to-buffer flow control mechanism is
indicated in the respective fcFxPortBbCreditModel.
1.3.6.1.3.42.2.1.2.4.1.6
The Receive Data Field Size of the attached Nx_Port. This is a binary value that specifies
the largest Data Field Size for an FT_1 frame that can be received by the Nx_Port. The
value is a number of bytes in the range 128 to 2112, inclusive.
1.3.6.1.3.42.2.1.2.4.1.7
Indicates that the attached Nx_Port has requested the Fx_Port for the support of classes of
services and the Fx_Port has granted the request.
1.3.6.1.3.42.2.1.2.4.1.8
A variable indicating that the attached Nx_Port has requested the Fx_Port for Intermix
support and the Fx_Port has granted the request. This flag is valid only if Class 1 service is
supported. Possible values are yes (1) or no (2).
1.3.6.1.3.42.2.1.2.4.1.9
Indicates whether the Fx_Port has agreed to support Stacked Connect from the fabric
login. This is meaningful only if Class 1 service has been agreed to.
1.3.6.1.3.42.2.1.2.4.1.10
A variable indicating whether the Fx_Port has agreed to support Class 2 sequential
delivery from the fabric login. This is meaningful only if Class 2 service has been agreed
to. Possible values are yes (1) or no (2).
1.3.6.1.3.42.2.1.2.4.1.11
A flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery
from the fabric login. This is meaningful only if Class 3 service has been agreed to.
Possible values are yes (1) or no (2).
Fabric OS 5.x MIB reference guide 105