Snmpengineidornone; Entity Mib Objects; Physical Entity Group; Entphysicaltable - HP StorageWorks 2/64 - Core Switch Reference Manual

SnmpEngineIdOrNone

Status
Description
Syntax

Entity MIB objects

The Entity MIB objects are divided into the following groups:
• "Physical entity
• "Logical entity
• "Entity mapping
• "General group" on page 128
The following sections list the MIBs in each group.

Physical entity group

This section lists the entPhysicalTable MIBs.

entPhysicalTable

OID
Status
Description
Note
Current
A specially formatted SnmpEngineID string for use with the Entity MIB.
If an instance of an object with syntax SnmpEngineIdOrNone has a non-zero length, then
the object encoding and semantics are defined by the SnmpEngineID textual convention
(see RFC2571).
If an instance of an object with syntax SnmpEngineIdOrNone contains a zero-length
string, then no appropriate SnmpEngineID is associated with the logical entity (that is,
SNMPv3 not supported).
OCTET STRING (SIZE(0..32))
group" on page 115
group" on page 123
group" on page 125
1.3.6.1.2.1.47.1.1.1
Current
This table contains one row per physical entity (see
at least one row for an overall physical entity.
This object is implemented for Fabric OS 4.1 and above. The overall physical entry for
HP is the chassis; in Fabric OS 4.4 and later it is marked as a FRU.

entPhysical table entries for HP StorageWorks switches.

Empty string or SnmpEngineID
Figure 35). The table always contains
Fabric OS 5.x MIB reference guide 115
Table 10 shows the