Fcfxportfcphversionagreed; Fcfxportnxportbbcredit; Fcfxportnxportrxdatafieldsize; Fcfxportcossuppagreed - HP StorageWorks 2/64 - Core Switch Reference Manual

fcFxPortFcphVersionAgreed

OID
Description

fcFxPortNxPortBbCredit

OID
Description

fcFxPortNxPortRxDataFieldSize

OID
Description

fcFxPortCosSuppAgreed

OID
Description

fcFxPortIntermixSuppAgreed

OID
Description

fcFxPortStackedConnModeAgreed

OID
Description
1.3.6.1.2.1.75.1.2.3.1.2
The version of FC-PH that the Fx_Port has agreed to support from the fabric login.
1.3.6.1.2.1.75.1.2.3.1.3
The total number of buffers available for holding a Class 1 connect-request and Class 2
or Class 3 frames to be transmitted to the attached Nx_Port. It is for buffer-to-buffer flow
control in the direction from Fx_Port to Nx_Port. The buffer-to-buffer flow control
mechanism is indicated in the respective fcFxPortBbCreditModel.
1.3.6.1.2.1.75.1.2.3.1.4
The Receive Data Field Size of the attached Nx_Port. This is a binary value that specifies
the largest Data Field Size for an FT_1 frame that can be received by the Nx_Port. The
value is a number of bytes in the range 128 to 2112, inclusive.
1.3.6.1.2.1.75.1.2.3.1.5
Indicates that the attached Nx_Port has requested the Fx_Port for the support of classes of
services and the Fx_Port has granted the request.
1.3.6.1.2.1.75.1.2.3.1.6
A variable indicating that the attached Nx_Port has requested the Fx_Port for Intermix
support, and the Fx_Port has granted the request. This flag is valid only if Class 1 service
is supported. Possible values are:
• yes (1): The attached Nx_Port has requested the Fx_Port for Intermix support, and the
Fx_Port has granted the request.
• no (2): The attached Nx_Port has not requested the Fx_Port for Intermix support.
1.3.6.1.2.1.75.1.2.3.1.7
Indicates whether the Fx_Port has agreed to support Stacked Connect from the fabric
login. This is meaningful only if Class 1 service has been agreed to.
Fabric OS 5.x MIB reference guide 81