Set Email-Parameters - HP P2000 Reference Manual

set email-parameters

Description Sets SMTP parameters for event notification.
Syntax
set email-parameters
server server
domain domain
email-list email-addresses
notification-level crit|error|warn|info|none
[sender sender]
Parameters server server
The IP address of the SMTP mail server to use for the email messages.
domain domain
The domain name that is joined with an @ symbol to the sender name to form the "from" address for
remote notification. The domain name can have a maximum of 31 bytes. Because this name is used
as part of an email address, do not include spaces. For example: MyDomain.com. If the domain
name is not valid, some email servers will not process the mail.
email-list email-addresses
Enter up to four comma-separated email addresses for recipients of event notifications. Each email
address can have a maximum of 79 bytes. For example: Admin@MyDomain.com.
notification-level crit|error|warn|info|none
The minimum severity for which the system should send notifications:
• crit: Sends notifications for Critical events only.
• error: Sends notifications for Error and Critical events.
• warn: Sends notifications for Warning, Error, and Critical events.
• info: Sends notifications for all events.
• none: Disables email notification. This option is the default.
sender sender
Optional. The sender name that is joined with an @ symbol to the domain name to form the "from"
address for remote notification. This name provides a way to identify the system that is sending the
notification. The sender name can have a maximum of 31 bytes. Because this name is used as part
of an email address, do not include spaces. For example: Storage-1. If no sender name is set, a
default name is created.
Example Set the system to send an email from RAIDsystem@mydomain.com to both
sysadmin@mydomain.com and JSmith@domain2.com when a non-Informational event occurs:
# set email-parameters server 10.1.1.10 domain mydomain.com email-list
sysadmin@mydomain.com,JSmith@domain2.com notification-level warn sender
RAIDsystem
Info: Set Email Address 1 to: sysadmin@mydomain.com
Info: Set Email Address 2 to: JSmith@domain2.com
Info: Set Email Server Name to: 10.1.1.10
Info: Set Email Domain Name to: mydomain.com
Info: Set Email Notification Level to: warn
Info: Set Email Sender Name to: RAIDsystem
See also • show email-parameters
• test
HP P2000 G3 MSA System CLI Reference Guide 133