HP P2000 Reference Manual page 381

Table 58 replication-volume properties (continued)
Name Type
collision- string
policy
collision- string
policy-numeric
monitor- uint32
interval
priority string
priority- string
numeric
connection- string
status
connection- string
status-numeric
connection-time string
connection- string
time-numeric
replication-set string
local-volume- string
serial-number
Example
# show replication-volumes
...
<OBJECT basetype="replication-volume" name="replication-volume" oid="1" format="rows">
<PROPERTY name="name" type="string">vdRx_v001</PROPERTY>
<PROPERTY name="serial-number" key="true" type="string">SN</PROPERTY>
<PROPERTY name="status" type="string">Online</PROPERTY>
Description
Determines the next image to replicate when multiple replication images are
queued.
• Newest: Only the latest replication image should be considered for the next
replication operation.
• Oldest: Only the latest n replication images should be considered for the
next replication operation, where n is defined by the max-queue property
and the oldest of these images should be considered first. This is the default.
Numeric equivalents for collision-policy values.
•
0: Oldest
•
1: Newest
Interval in seconds at which the primary volume should query the secondary
volume. The default is 60.
Priority of the replication operation with respect to I/O operations competing for
the system's processors.
• High: Replication has higher priority than host I/O. This can cause heavy
I/O to be slower than normal. This is the default.
• Medium: Replication performance is balanced with host I/O performance.
• Low: Replication runs at a slower rate with minimal effect on host I/O. Use
when streaming data without interruption is more important than data
redundancy.
Numeric equivalents for priority values.
•
0: High
•
1: Medium
•
2: Low
• Not Attempted: Communication has not been attempted to the remote
volume.
• Online: The volumes in the replication set have a valid connection but
communication is not currently active.
• Active: Communication is currently active to the remote volume.
• Offline: No connection is available to the remote system.
Numeric equivalents for connection-status values.
•
0: Not Attempted
•
1: Online
•
2: Active
•
3: Offline
Date and time of the last communication with the remote volume, or N/A.
Unformatted connection-time value.
Replication set serial number.
Local replication volume serial number.
HP P2000 G3 MSA System CLI Reference Guide 381