HP P2000 Reference Manual page 271

Class
• standard: Standard volume, not enabled for snapshots
• PTSNAP: Snapshot-related volume such as a master volume, snap pool, or snapshot
• Proxy: Destination of an in-progress replication from a remote volume, which when complete
will change to type snapshot
Qualifier
• N/A: Non-replication-specific volume such as a standard volume, master volume, snapshot, or
snap pool
• RSR: Replication-specific volume, such as a primary volume, secondary volume, replication
snapshot, or replication image
Volume Description
• For OpenVMS, a numeric value (set with
to an OpenVMS host.
• For HP-UX, a text value (set in-band by a host application) that identifies the volume.
• Blank if not set.
Example Show volume information for standard volumes only:
# show volumes type standard
Vdisk Name
Type
--------------------------------------------------------------------------
VD1 V1
standard
--------------------------------------------------------------------------
Show volume information for vdisk VD1 only:
# show volumes vdisk VD1
Vdisk Name
Type
--------------------------------------------------------------------------
VD1 V1
standard
VD1 V2
master volumePTSNAP
VD1 V3
snap-pool
VD1 V4
snapshot
--------------------------------------------------------------------------
Basetypes • volumes
• status
See also • create volume
• delete volumes
• expand volume
• set volume
• show vdisks
• show volume-maps
Size Serial Number
Class Qualifier
20.0GB SN
standard N/A
Size Serial Number
Class Qualifier
35.9GB SN
standard N/A
35.9GB SN
RSR
35.9GB SN
PTSNAP N/A
35.9GB SN
PTSNAP N/A
create volume or set volume) that identifies the volume
WR Policy Cache Opt
Volume Description
write-back standard
WR Policy Cache Opt
Volume Description
write-back standard
write-back standard
write-back standard
write-back standard
HP P2000 G3 MSA System CLI Reference Guide 271
Read Ahead Size
Default
Read Ahead Size
Default
Default
Default
Default