HP P2000 Reference Manual page 197

Disabled
• Enabled: PHY is enabled.
• Disabled: PHY is disabled.
Reason
• Error count interrupts: PHY disabled because of error-count interrupts.
• Phy control: PHY disabled by a SES control page as a result of action by a Storage
Controller or user.
• Not ready: PHY is enabled but not ready. Appears for SC- 1 PHYs when the partner I/O
module is not installed. Appears for Drive, SC- 1 , or Ingress PHYs when a connection problem
exists such as a broken connector.
• Drive removed: PHY disabled because drive slot is empty.
• Unused - disabled by default: PHY is disabled by default because it is not used.
• Excessive Phy changes: PHY is disabled because of excessive PHY change counts.
Example Show expander status for a single-enclosure system with an empty disk slot:
# show expander-status
Encl Ctlr
Reason
-------------------------------------------------------------------------------
1 A
1 A
Not ready
...
1 A
Drive removed
1 A
1 A
1 A
...
1 A
1 A
...
1 A
-------------------------------------------------------------------------------
Encl Ctlr
Reason
-------------------------------------------------------------------------------
1 B
1 B
Not ready
...
1 B
Drive removed
1 B
1 B
1 B
...
1 B
...
1 B
-------------------------------------------------------------------------------
Basetypes • sas-status-controller-a
• status
Phy Type Status
0 Drive Enabled - Healthy
1 Drive Enabled - Degraded
23 Drive Disabled
0 SC-1 Enabled - Healthy
1 SC-1 Enabled - Healthy
0 SC-0 Enabled - Healthy
3 SC-0 Enabled - Healthy
0 Egress Enabled - Healthy
3 Egress Enabled - Healthy
Phy Type Status
0 Drive Enabled - Healthy
1 Drive Enabled - Degraded
23 Drive Disabled
0 SC-1 Enabled - Healthy
1 SC-1 Enabled - Healthy
0 SC-0 Enabled - Healthy
0 Egress Enabled - Healthy
3 Egress Enabled - Healthy
Elem Status Disabled
OK Enabled
Non-critical Enabled
OK Disabled
OK Enabled
OK Enabled
OK Enabled
OK Enabled
OK Enabled
OK Enabled
Elem Status Disabled
OK Enabled
Non-critical Enabled
OK Disabled
OK Enabled
OK Enabled
OK Enabled
OK Enabled
OK Enabled
HP P2000 G3 MSA System CLI Reference Guide 197