Show Ntp-Status - HP P2000 Reference Manual

show ntp-status

Description Shows the status of the use of Network Time Protocol (NTP) in the system.
Syntax
show ntp-status
Output NTP Status
• activated: NTP is enabled
• deactivated: NTP is disabled
NTP Server Address
NTP server IP address, or 0.0.0.0 if not set
Last Server Contact
Date and time, in the format year-month-day hour:minutes:seconds (UTC), of the last
message received from the NTP server; or none
Example Show NTP status for the system:
# show ntp-status
NTP Status
----------
NTP Status: activated
NTP Server Address: 69.10.36.3
Last Server Contact: 2009-12-04 16:24:42
Basetypes • ntp-status
• status
See also • set controller-date
HP P2000 G3 MSA System CLI Reference Guide 217