Table 58
replication-volume properties (continued)
Name
monitor-numeric
location
location-
numeric
ip-address-a
ip-address-b
primary-volume-
name
primary-volume-
serial
primary-volume-
status
primary-volume-
status-numeric
max-queue
max-retry-time
error-policy
error-policy-
numeric
link-type
link-type-
numeric
380 XML API basetype properties
Type
Description
Numeric equivalents for monitor values.
string
•
2: OK
•
other: Failed
•
Local: The replication volume is in the local system.
string
•
Remote: The replication volume is in a remote system.
Numeric equivalents for location values.
string
•
0: Local
•
1: Remote
IP address of the network port in controller A in the remote system.
string
IP address of the network port in controller B in the remote system.
string
Primary volume name.
string
Primary volume serial number.
string
Primary volume status.
string
•
Online
•
Conflict
•
Offline
Numeric equivalents for primary-volume-status values.
string
•
0: Online
•
1: Conflict
•
2: Offline
Maximum number of replication images to consider when determining the next
uint32
image to replicate. Used only if the collision-policy property is set to
Oldest. The default is 32.
Maximum amount of time in seconds that the replication volume should retry a
uint32
replication operation on any specific image when errors occur. Used only if the
error-policy property is set to Retry. The default is 1800.
Determines the action to take when an error occurs during replication.
string
•
Retry: Retry the replication for the time specified by the max-retry-
time property. This is the default.
•
Suspend: Suspend the replication until the error is resolved automatically or
through user intervention.
Numeric equivalents for error-policy values.
string
•
0: Retry
•
1: Suspend
Type of ports used to link the primary and secondary volumes.
string
•
FC: FC ports.
•
iSCSI: iSCSI ports.
Numeric equivalents for link-type values.
string
•
8: FC WWNN
•
16: FC WWPN
•
64: iSCSI IPv4
•
128: iSCSI IPv6