Show Controller-Statistics - HP P2000 Reference Manual

Msa system
Hide thumbs Also See for P2000:
Table of Contents

Advertisement

show controller-statistics

Description Shows performance statistics for controller A, B, or both. Properties shown only in XML API format
are described in
Syntax
show controller-statistics [a|b|both]
Parameters a|b|both
Optional. Specifies whether to show information for controller A, B, or both. If this parameter is
omitted, information is shown for both controllers.
Output Durable ID
Controller ID in the form controller_ID.
CPU Load
Percentage of time the CPU is busy, from 0–100.
Power On Time (Secs)
Number of seconds since the controller was restarted.
Bytes per second
Data transfer rate calculated over the interval since these statistics were last requested or reset. This
value will be zero if it has not been requested or reset since a controller restart.
IOPS
Input/output operations per second, calculated over the interval since these statistics were last
requested or reset. This value will be zero if it has not been requested or reset since a controller
restart.
Number of Reads
Number of read operations since these statistics were last reset or since the controller was restarted.
Number of Writes
Number of write operations since these statistics were last reset or since the controller was restarted.
Data Read
Amount of data read since these statistics were last reset or since the controller was restarted.
Data Written
Amount of data written since these statistics were last reset or since the controller was restarted.
Example Show statistics for both controllers:
# show controller-statistics
Durable ID
Number of Reads
--------------------------------------------------------------------
controller_A
115
controller_B
0
--------------------------------------------------------------------
Basetypes
• controller-statistics
• status
• reset all-statistics
See also
• reset controller-statistics
• show disk-statistics
• show host-port-statistics
• show vdisk-statistics
• show volume-statistics
XML API basetype properties
CPU Load
Power On Time (Secs)
Number of Writes
12
17563
15
10
17564
0
on page 287.
Bytes per second
Data Read
Data Written
0B
654.3KB
61.4KB
0B
0B
0B
HP P2000 G3 MSA System CLI Reference Guide 183
IOPS
0
0

Advertisement

Table of Contents
loading

This manual is also suitable for:

P2000 g3

Table of Contents