Applying Gt-10B Effects To A Computer's Audio Playback - Boss GT-10B Owner's Manual

Applying GT-10B Effects to a Computer's Audio Playback

In the computer application, set the audio output port to the GT-10B.
You can use the GT-10B to apply effects to the audio data played by the computer, then record the data again with the computer.
Use this process when, for example, you want to add effects to existing audio data.
SYSTEM
The SYSTEM MENU screen appears.
1.
Select INPUT/OUTPUT.
2.
The INPUT/OUTPUT screen appears.
3.
Select the INPUT SELECT (page 1) screen.
4.
Set the INPUT SELECT parameter to USB In.
5.
Parameter/
Explanation
Range
Bass 1–3
USB In
Chapter 7 Using the GT-10B Connected to a Computer Via USB
Effects are applied to the signals input via the INPUT jacks.
Effects are applied to the signals input via USB.
• Set the software so audio is not passed through
it.
• Set the Dir.Monitor parameter to On.
99