Table of Contents
Advertisement
Parameter/
Explanation
Range
Mode
This records the sound after it passes through the
effects.
Performance
This lets you achieve a rich variety of performances
by combining different tones.
This records the sound before it passes through the
effects, and applies the effects during loop play.
Patch Edit
This enables you to adjust effects or compare patch
tones.
Pdl Mode (Pedal Mode)
The BANK pedals are not used for operation of the Phrase Loop feature. These are used as bank switch pedals.
Off
Phrase Loop can be controlled by assigning the Phrase Loop feature to any of the CTL pedals 1 through 4 etc. and maintaining the
BANK pedals' bank switching function.
On
The BANK pedals are used for operation of the Phrase Loop feature.
Rec Mode (Recording Mode)
Mono
Phrases are recorded in mono (max. 38 seconds).
Stereo
Phrases are recorded in stereo (max. 19 seconds).
Play Lev (Play Level)
0–120
Sets the phrase playback volume.
Clear Pdl (Clear Pedal Function)
When you press [BANK ▲] while the Phrase Loop feature is on, the recorded data is cleared and then
Clear Only
GT-10B switches to STANDBY mode.
When you press [BANK ▲] while the Phrase Loop feature is on, the performance of the recorded phrase is muted (the
recorded data is not erased).
Mute/Clear
If you then press [BANK ▲] again while the phrase is muted, the recorded data is cleared and then GT-10B switches
to STANDBY mode.
Chapter 4 Playing Sounds
FX
Effector
Phrase
Phrase
Loop
Loop
When the Mode is
When the Mode is
set to the Patch Edit.
set to the Performance.
61
Advertisement
Table of Contents
