Editing; Basic Operation; Creating Sounds Based On Existing Patches - Boss GT-10B Owner's Manual

Quick Guide

Editing

Basic Operation

This describes the basic operations you use when editing settings.
1
Access the System Menu
screen.
Buttons and Knobs You Use
This displays the System Menu.
Sets the parameter value.

Creating Sounds Based on Existing Patches

Let's try creating a new sound based on a patch whose sound is close to what you want to make.
Switching Effects On and Off
1. Choose a patch
whose sound is
close to the
sound you want
to create (p. 16).
Buttons and Knobs You Use
These set the parameter value.
These choose the effect.
18
2
Choose the menu item.
or
* In this example, "PATCH EDIT" icon is selected.
2. Choose the effect you want to switch on
or off.
For more information about each parameter, refer to
"Chapter 8 Parameters Guide" (p. 100).
3
The setting screen
for the selected
item appears.
· These set the parameter value.
· Changes the page.
· Chooses an item.
This confirms the selected item.
BPM
This quits making settings.
3. Again press the
button you
pressed in step 2.
The effect is
switched on or off.
Effect on: button
illuminated
Effect off: button
extinguished
BPM