Table of Contents
Advertisement
SEND/RTN (Send/Return)
Displayed Parameter
On/Off
Mode
Send Level
Return Level
NS1, NS2 (Noise Suppressor)
Displayed Parameter
On/Off
Threshold
Release
Detect
(Others)
Displayed Parameter
Tuner Sw *1
ManualModeSw *1
On/Off
Rec/Play *1
Clear *1
Mute/Play *1
BPM Tap *1
Delay Tap *1
Start/Stop *1 *2
MMCPlay/Stop *1 *2
Level Inc.10 *1
Level Inc.20 *1
Level Dec.10 *1
Level Dec.20 *1
Number Inc. *1
Number Dec. *1
Bank Inc. *1
Bank Dec. *1
*1
This parameter is disabled when the SOURCE parameter is set to
Internal Pedal or Wave Pedal.
*2
The Src Mode parameter normally functions using the Toggle
setting (the Src Mode parameter setting is disregarded).
(Real Name)
(Real Name)
(Real Name)
(Tuner Switch)
(Manual Mode Switch)
(Patch Level Increment 10)
(Patch Level Increment 20)
(Patch Level Decrement 10)
(Patch Level Decrement 20)
(Patch Number Increment)
(Patch Number Decrement)
(Patch Bank Increment)
(Patch Bank Decrement)
Chapter 8 Parameters Guide
SEND/RETURN
This allows you to connect an external effects device to the
SEND and RETURN jacks and use it as part of the GT-10B's
effects.
Parameter/
Explanation
Range
SEND/RETURN ON/OFF
Switches the SEND/RETURN on/off.
Off, On
Pressing [MASTER/PEDAL FX] switches
On and Off.
Mode
Switches the SEND/RETURN mode.
Outputs the input to SEND/RETURN to
the SEND jack and the input from the RE-
TURN jack to the circuit post-SEND/RE-
TURN. Use this when you want to
connect an external effects device serially
Normal
in the GT-10B's effects chain.
fig.04-0160
SEND
Outputs the input to SEND/RETURN to
the SEND jack, mixes the input from the
RETURN jack with the input to SEND/
RETURN (the direct sound), then outputs
this to the circuit post-SEND/RETURN.
Use this when you want to mix the GT-
10B's effects sounds together with the
Direct Mix
sound with the external effects device ap-
plied to it.
fig.04-0170
SEND
Outputs the input to SEND/RETURN to
the SEND jack. The input from the RE-
TURN jack is disregarded. For example,
using this with the GT-10B's reverb and
delay immediately ahead of the SEND/
RETURN allows you to use the SEND
Branch Out
jack as a direct out.
fig.04-0180
SEND
Send Lev (Send Level)
Adjusts the volume of the output to the
0–200
external effects device.
ReturnLev (Return Level)
Adjusts the volume of the input from the
0–200
external effects device.
MONO
RETURN
RETURN
131
Advertisement
Table of Contents
