Making Settings For A Connected Device (Output Select) - Boss GT-10B Owner's Manual

Chapter 1 Outputting Sounds

Making Settings for a Connected Device (Output Select)

Select the type of device connected to the OUTPUT jack.
• To derive the maximum performance from the GT-10B, be sure to make the correct setting for OUTPUT SELECT, the one that's most suitable for your setup.
• The OUTPUT SELECT function affects sounds from the OUTPUT jacks. The output from the SUB OUTPUT jacks will always be equivalent to the sound that is
output when the LINE/PHONES setting is used.
• If the headphones are connected to the PHONES jack, the output from OUTPUT jack and PHONES jack will be equivalent to the sound that is output when the
LINE/PHONES setting is used.
The OUTPUT SELECT screen appears.
1.
Move the cursor to Mode.
2.
Set the Mode.
3.
Value Explanation
Patch This uses the patch's Output Select setting. You can use a different output setting for each individual patch.
System This uses the system's Output Select setting. The same output setting is used for all patches.
Move the cursor to Select.
4.
Choose the operation for the Select parameter.
5.
Value
AMP WITH TWEETER
AMP NO TWEETER
LINE/PHONES
26
Explanation
Use this setting when connecting to a tweeter-equipped bass amp.
Use this setting when connecting to a bass amp that has no tweeter. The high-frequen-
cy range is adjusted.
Use this setting when connecting to a multi-track recorder for recording or when us-
ing headphones.
Icon displayed on
the Play screen