Switching The Sub Output Jacks Signals - Boss GT-10B Owner's Manual

Switching the SUB OUTPUT Jacks Signals

You can select the signals to be output from the SUB OUTPUT (XLR) jacks.
SYSTEM
The SYSTEM MENU screen appears.
1.
Select INPUT/OUTPUT.
2.
The INPUT/OUTPUT screen appears.
3.
Select the SUB OUTPUT (page 4) screen.
4.
Move the cursor to Mode.
5.
Select the Mode you want to set.
6.
Value Explanation
The GT-10B's stereo output is output as is, without change.
L/R
Set to L/R when recording in stereo or sending stereo signals to a PA.
Output from SUB OUTPUT L jack is the GT-10B's stereo output mixed to mono, output from SUB OUTPUT
R jack is the sound before effect (mono) directly.
Effect/Direct The INPUT SELECT, INPUT LEVEL and PRES. parameters are enabled in the input sound.
For recording, you can record the direct bass sound on a separate channel, then later on you can remix the direct sound with
the effect sound during mixdown.
Chapter 5 Making Global Settings
69