Controlling The Direct Monitor Setting From A Computer; Recording The Gt-10B's Output With A Computer - Boss GT-10B Owner's Manual

Chapter 7 Using the GT-10B Connected to a Computer Via USB

Controlling the Direct Monitor Setting from a Computer

This setting determines whether or not the command (the Direct Monitor command) controlling the Direct Monitor setting (p. 97)
is enabled.
SYSTEM
The SYSTEM MENU screen appears.
1.
Select USB.
2.
The USB screen appears.
3.
Move the cursor to Monitor Cmd.
4.
Set the desired value.
5.
Parameter/
Range
Disable
Enable

Recording the GT-10B's Output with a Computer

In the computer application, set the audio input port to the GT-10B.
If passing audio data through the software you're using, switch the direct monitor off.
98
Explanation
The Direct Monitor command is disabled, maintaining the Direct Monitor mode set by the GT-10B.
The Direct Monitor command is enabled, allowing the Direct Monitor mode to be switched from a computer.