Table of Contents
Advertisement
ENHANCER
This is an effect that clarifies the contour of the input sound by
emphasizing the attack of the sound following changes in the
input level.
Parameter/
Explanation
Range
Sens (Sensitivity)
This adjusts the Enhancer sensitivity. The more
0–100
the value is increased, the more softly you can
play and still have the effect applied.
Low Freq (Low Frequency)
Sets the low frequency range for the enhanced
31.5Hz–125Hz
sound.
Low Lev (Low Level)
Adjusts the enhancer volume for the high fre-
0–100
quency range.
High Freq (High Frequency)
Sets the high frequency range for the enhanced
800Hz–8.00kHz
sound.
High Lev (High Level)
Adjusts the enhancer volume for the high fre-
0–100
quency range.
TONE MODIFY
This changes the tone of the connected bass.
Parameter/
Explanation
Range
Type
Selects the type of tone modification.
Fat
Fat tone with boosted mid range.
Presence
Bright tone with boosted high-mid range.
Mild
Mild tone with the high end cut back.
Tight
Tone with the low frequencies cut.
Enhance
Tone with the high frequencies boosted.
This produces a tone with greater power and
Resonator 1, 2, 3
punch by adding resonance in the low-frequen-
cy range and midrange.
Resonance
This adjusts the strength of the low-end and
0–100
midrange resonance when Type is set to Reso-
nator 1, 2, or 3.
Low
-50–+50
Adjusts the tone for the low frequency range.
High
-50–+50
Adjusts the tone for the High frequency range
Level
0–100
Adjusts the volume.
Chapter 8 Parameters Guide
BASS SIM. (Bass Simulator)
Simulation of the characteristics of particular bass components
such as pickups and different bass bodies allows you to switch
among a number of different bass types all while using a single
bass.
Parameter/
Explanation
Range
Type
Selects the type of the bass simulator.
Changes from a passive type pickup tone to an
'PAS'>'ACT'
active type pickup tone.
Changes from an active type pickup tone to a
'ACT'>'PAS'
passive type pickup tone.
Changes from a single-coil pickup tone to a
'SGL'>'HUM'
humbucking pickup tone.
Changes from a humbucking pickup tone to a
'HUM'>'SGL'
single-coil pickup tone.
Changes a solid body bass tone to a hollow
'SLD'>'HLW'
body bass tone with the body resonance added.
Changes a single-coil pickup tone to an acoustic
'SGL'>'ACO'
bass tone.
Changes a humbucking pickup tone to an
'HUM'>'ACO'
acoustic bass tone.
Low
-50–+50
Adjusts the tone for the low frequency range.
High
-50–+50
Adjusts the tone for the High frequency range
Body
Adjusts the way the body sounds when Type is
set to 'SLD'>'HLW', 'SGL'>'ACO,' or
'HUM'>'ACO.'
0–100
The body sound increases as the value is raised;
reducing the value produces a tone similar to
that from a piezo pickup.
Level
0–100
Adjusts the volume.
109
Advertisement
Table of Contents
