Setting Up Scan To Network Pc - Oki MB491 User Manual

Configuring the Network Settings
Select [Enter] and then press
7
Press the and then enter the
8
information in B-1.
Select [Enter] and then press
9
Press the and then select a protocol
10
for receiving e-mail for the machine, and
then press .
OK
- If you want your machine to receive e-mail from
the POP3 server, select [POP3]. Proceed to the
step 11.
- If you want your machine to receive e-mail
without using a mail server, select [SMTP].
Proceed to the step 13.
- If you do not want your machine to receive e-mail,
select [Disable]. Proceed to the step 13.
Press the and then enter the
11
information in B-3.
Select [Enter] and then press
12
Press the and then select an
13
authentication method based on the
information in B-4. Then, press
- If B-4 is "Do not authenticate", select [Do not
authenticate]. Proceed to the step 24.
- If B-4 is "SMTP", select [SMTP Auth]. Proceed to
the step 14.
- If B-4 is "POP", select [POP Before SMTP].
Proceed to the step 18.
Press the and then enter the
14
information in B-5.
Select [Enter] and then press
15
Press the and then enter the
16
information in B-6.
Select [Enter] and then press
17
Proceed to the step 24.
Press the and then enter the
18
information in B-3.
Select [Enter] and then press
19
Press the and then enter the
20
information in B-7.
Select [Enter] and then press
21
Press the and then enter the
22
information in B-8.
Select [Enter] and then press
23
. When the setup menu screen is
24
OK
displayed, press
.
OK
The setup for Scan To E-mail, Scan To Fax Server
and Internet Fax is complete.
Reference
For details on how to use Scan To E-mail, refer to
E-mail" P.
For details on how to use Scan To Fax Server, refer to
"Basic Procedure for Scan To Fax Server" P.
For details on how to use Internet Fax, refer to
Procedure for Internet Faxing" P.
Setting Up Scan To Network
PC
.
OK
The Scan To Network PC function enables you to
send and save scanned images to the "shared
folder" of a computer on the network. To use this
.
function, register your machine on the computer
OK
as a user and create a shared folder, and then
create a profile on your machine to register the
settings for the computer.
Note
Before starting the setup, get permission from the network
administrator to create a shared folder on the computer by
following the procedure below.
Memo
The CIFS protocol is used in this procedure.
.
OK
Checking the Name of the Computer
Check the name of the computer following the
.
procedure below, and fill in C-1 of the Setup
OK
Information Form.
For Windows 7, Windows Server
2008 R2, Windows Server 2008
and Vista
.
OK
Click [Start] and select [Control
1
Panel].
Select [System and Security].
2
.
OK
For Windows Server 2008 and Windows Vista,
select [System and Maintenance].
.
OK
- 62 -
.
OK
102.
93.
"Scan to
91.
"Basic