Scannable Area; Loading Documents - Oki MB491 User Manual

Loading Paper and Documents

Scannable Area

The text or images on the shaded area shown
below are not scanned.
2 mm
Memo
The arrow in the above drawing indicates the feeding
direction in the auto document feeder, or the scanning
start side on the document glass.

Loading Documents

Scanner Scannable
type size
ADF A4
A5
B5
A6*
Letter
Legal 13
Legal 13.5
Legal 14
Executive
Document A4
glass A5
B5
A6
Letter
Executive
Note
For documents using adhesives, ink, or correction fluid, set
them after checking that these have completely dried.
Duplex scanning can not be performed on paper indicated
by an "*".
2 mm
2 mm
2 mm
Paper Paper
capacity weight
50 sheets
60 to 105 g/m
2
(80 g/m ) (16 to 28 lb)
- 20 mm
Loading Documents on the ADF
Load your documents face up on the ADF.
1
If your documents are portrait, load them with the
top edge of the documents in first.
If your documents are landscape, load them with
the left edge of the documents in first.
Adjust the document guides to the width
2
of your documents.
2
Loading Documents on the Docu-
ment Glass
Lift and open the document glass cover.
1
Place a document face down on the
2
document glass.
If your document is portrait, align its top edge to
the upper-left corner of the glass.
- 38 -