Checking and Canceling Fax Transmission
Checking and Canceling Fax Transmission
This section explains how to check or cancel fax jobs.
Canceling Fax Transmission
You can cancel a job that is being transmitted as
long as the message indicating the job has been
completed has not appeared.
Press the <STOP> key on the operator
1
panel.
Canceling a Reserved Job
You can cancel reserved jobs.
Press the <FAX/HOOK> key on the
1
operator panel.
Check that [Fax] is selected and then
2
press
to open the fax start screen.
OK
Press the
to select [Fax Job View/
3
Cancel] and then press
Press the
to select the job you want to
4
cancel and then press
Check the job contents and then press
5
the
.
Press the
to select [Delete Reserved
6
Tx] and then press
Press the
or
7
press
.
OK
Note
When you select a broadcast job, the job itself is cancelled.
Memo
The job that is being transmitted is displayed at the top of
the list.
.
OK
.
OK
.
OK
select [Yes] and then
Checking Transmission and
Reception History
You can check transmission and reception history
and results.
Memo
If a fax is being transmitted, you can check the
transmission on the [Fax Job View/Cancel] screen.
Press the <FAX/HOOK> key on the
1
operator panel.
Check that [Fax] is selected and then
2
press to
Press the
3
then press
Press the
4
[Rx History] and then press
Press the
5
want to check and then press
Check the history contents and then
6
press
.
OK
Note
The received message history displayed on the panel is
only for messages received with F code polling.
- 84 -
the fax start screen.
OK
to select [Fax History] and
.
OK
to select [Tx History] or
to select the history you
.
OK
.
OK