Pbx Connecting; Setting For Super G3; Specifying Reception Mode - Oki MB491 User Manual

When the setup menu screen is displayed,
12
press to complete the setup.

PBX Connecting

When connecting to PBX (internal exchange), put
[PBX Line] to [ON].
Press the <SETTING> key.
1
Press the to select [Admin Setup]
2
and then press
OK
Enter the administrator password.
3
The default password is "aaaaaa".
Select [Enter] and then press
4
Press the to select [Fax Setup] and
5
then press .
OK
Press the to select [Fax Setting] and
6
then press .
OK
Press the to select [PBX Line] and
7
then press .
OK
Press the to select [ON] and then
8
press .
OK
Press the until the top screen appears.
9

Setting for Super G3

Press the <SETTING> key.
1
Press the to select [Admin Setup]
2
and then press
OK
Enter the administrator password.
3
The default password is "aaaaaa".
Select [Enter] and then press
4
Press the to select [User Install] and
5
then press .
OK
Press the to select [Super G3] and
6
then press .
OK
Press the to select [OFF] and then
7
press .
OK
Press the until the top screen appears.
8
.
.
OK
.
.
OK
Basic Settings for Faxing (for MB471, MB491, ES4191 MFP only)

Specifying Reception Mode

Depending on your environment of the machine,
the optimal reception mode is different. Check
with the following description.
Fax Ready Mode
This mode is recommended when you use the
machine as a fax machine.
Tel/Fax Ready Mode
This mode is recommended when you connect an
external phone to the machine.
Ans/Fax Ready Mode
This mode is recommended when you connect an
external answering machine to the machine.
Tel Ready Mode
This mode is recommended when you mostly use
an external phone connected to the machine.
DRD
This mode is recommended when you use the
distinctive ring detection (DRD) function provided
by a telephone company.
Press the <SETTING> key on the
1
operator panel.
Press the
2
and press
Enter the administrator password.
3
The factory default password is "aaaaaa".
Select [Enter] and press
4
Press the
5
press .
OK
Press the
6
and press
Press the
7
mode and press
Settable Reception Mode:
Fax Ready Mode*
Ans/Fax Ready Mode
Press the
8
appears.
- 45 -
to select [Admin Setup]
.
OK
.
OK
to select [User Install] and
to select [Reception Mode]
.
OK
to specify the reception
.
OK
Tel/Fax Ready Mode
Tel Ready Mode
*indicates the factory default.
until the fax start screen
1
DRD